GO! Belt Die — Sew Fabric Belts, Bag Closures & Wearable Accessories

If you love quick finishes, wearable projects and clever DIY details, June’s Die to Try™ Series Die release is ready to fasten itself into your sewing room. The new GO! Belt-1 ½” Finished Die is a limited-edition, small-batch release designed for stylish belts, bag closures, wearable accessories and creative projects that go far beyond quilting.

Available only while supplies last, this beginner-friendly die cuts belt shapes quickly and accurately with any GO! cutter. It’s portable, easy to use and compatible with a wide range of materials, making it perfect for everything from fashion sewing to handmade gifts. And that’s not all! Five free patterns are included so you can start creating right away.

What Can You Make With the GO! Belt-1 ½” Finished Die?

This die may be small, but the creative possibilities are huge. Use it to make:

  • Fabric belts
  • Shawls and wraps
  • Tote bag straps
  • Decorative purse accents
  • Roll-up carriers
  • Costume accessories
  • DIY gifts
  • Craft fair merchandise
  • Bag closures
  • Needlepoint belt finishes

One of uses for this die that we’re especially excited about is self-finishing needlepoint belts! These personalized, handmade belts are wildly popular. Sending stitched belts to a professional finisher can be expensive and may take months to complete. With the GO! Belt die, makers can finish popular needlepoint belts (or any hand-crafted item that requires a buckle) by themselves with clean, accurate ends and polished buckle openings at home.

This also makes the die a great crossover tool for makers who enjoy garment sewing, needlepoint, quilting and bag making. This one clever die can support multiple creative hobbies while helping projects look more professional.

Why Makers Will Love the GO! Belt-1 ½” Finished Die

Traditional belt construction can involve a surprising amount of measuring, trimming and repeated cutting. The GO! Belt die streamlines the process so makers can focus on sewing and creating instead of wrestling with templates and rotary cutters.

The die includes:

  • Accurate belt-end shapes
  • Rounded corners
  • Hardware cutouts
  • Built-in seam allowances
  • Repeatable cuts every time

It works beautifully with cork, leather, vinyl, fused fabric and cotton fabric, making it easy to experiment with different looks and styles. It’s also Fat Quarter-friendly and pairs perfectly with GO! Strip Cutters for straps and closures.

Like all GO! dies, the GO! Belt die helps reduce repetitive hand cutting and strain on hands, wrists and shoulders. AccuQuilt cutters are designed to make fabric cutting fast, easy, accurate and safe while helping makers spend less time prepping and more time sewing.

Compatible with all GO! cutters (and Studio 2™ fabric cutters using an adapter), the compact 6" x 12" die size is also easy to take to retreats, classes and sewing meetups.

Why Use a Fabric Cutting Die Instead of Cutting Belt Shapes by Hand?

Belt shapes look simple until you try to cut them consistently by hand.

Rounded ends, buckle openings and smooth curves can be difficult to trim accurately with scissors or a rotary cutter, especially when working with thicker materials like cork or leather. Even slight inconsistencies can make finished belts look uneven or unprofessional.

The GO! Belt die helps solve those problems. Every cut with your GO! Belt die delivers:

  • Perfectly matched belt ends
  • Smooth, clean curves
  • Consistent buckle openings
  • Accurate repeatability
  • Faster cutting
  • Fewer measuring mistakes

Using a fabric cutting die also makes working with specialty materials more approachable. Cork, leather and vinyl can be intimidating to cut accurately with traditional methods, but the die helps simplify the process and creates perfectly accurate results in no time flat.

How Do You Make Fabric Belts With an AccuQuilt Die?

Making belts with the GO! Belt die is surprisingly beginner-friendly.

Start by cutting your belt ends with the die, then pair them with the belt strap. The strap part can be made using strips cut using a compatible GO! Strip Cutter, or by taking shapes from BOB dies, like in this cosplay belt made by AccuQuilt’s very own Caitlyn Josten. Caitlyn took shapes from the GO! Tree Skirt Wedge, GO! Tumbler, GO! Apple Core, GO! Dresden Plates and GO! Strip Cutters in two sizes – 3” (2 ½” Finished) and 6 ½” (6” Finished).

Our own Caitlyn Josten created this stunning cosplay costume using AccuQuilt dies!
Her belt is crafted from a variety of GO! dies.

For softer fashion belts, fused cotton works beautifully. For more structured belts, try cork, leather, vinyl or denim. Adding interfacing helps stabilize the belt and gives it the structure needed for everyday wear. You can also customize the belt buckle length depending on the hardware you choose and how you want the finished piece to fit.

It’s an easy way to add a professional quality handmade touch to both practical and decorative sewing projects.

What Materials Can You Cut With the GO! Belt Die?

The GO! Belt die works with a wide range of materials, including cork, leather, vinyl, cotton fabric, fused fabrics, denim and canvas.

For best results:

  • Cut one layer of cork or leather at a time
  • Cut up to four layers of fused cotton
  • Position fabric on the lengthwise grain whenever possible

Following AccuQuilt’s cutting guidance helps ensure accurate cuts and longer-lasting results.

Stylish GO! Belt Buckle Projects, FREE from AccuQuilt

We’re sure your head is already spinning with creative belt ideas! Here are a few free project patterns from our Creativity team to get you started.

GO! Flower Power Belt

The GO! Flower Power Belt pattern makes it easy to create stylish belts for dresses, jeans and layered outfits. Try it in bold cotton prints for a playful look or use cork and leather for a more elevated finish.

Contrasting fabrics, hardware and textures help personalize the project while the die makes tricky curved pieces easy to cut accurately. It’s a confident beginner project with plenty of room for creativity.

GO! Belt with Pennant Purse

Belt buckles are not just for waistlines! The GO! Belt with Pennant Purse pattern uses the die as both a decorative and functional purse closure.

Contrasting fabrics, hardware and textures help personalize the project while the die makes tricky curved pieces easy to cut accurately. It’s a confident beginner project with plenty of room for creativity.

GO! Belt “Roll Up” Carrier

Travel organizers and roll-up carriers become even more functional with sturdy belt closures.

The GO! Belt “Roll Up” Carrier pattern is ideal for sewing retreats, classes and makers who like to craft on the go. Belt details help elevate simple organization projects while keeping supplies secure and portable.

GO! Easy Belted Shawl

Looking for a quick wearable project? The GO! Easy Belted Shawl delivers cozy style with beginner-friendly construction.

This fast weekend project makes a thoughtful handmade gift and is perfect for chilly offices, cool evenings and layering throughout the year.

GO! Belted Recycled Jeans Hobo Tote

Upcycling projects feel even more special when they combine style and practicality.

The GO! Belted Recycled Jeans Hobo Tote transforms old denim into a durable everyday bag with a polished belt accent. It’s a great way to give worn jeans new life while creating something functional and personal.

Tips for Cutting the Best Belt Shapes Every Time

For the best cutting results:

  • Position fabric on the lengthwise grain
  • Rough cut fabric before placing it on the die
  • Only cover the shapes you want to cut
  • Match materials to the project requirements
  • Use interfacing or layered fabric for sturdier belts

These simple techniques will help you get perfect, quick, accurate cuts while reducing fabric waste.

Frequently Asked Questions About the GO! Belt-1 ½” Finished Die

Which cutters work with the GO! Belt die?

The GO! Belt-1 ½” Finished Die is compatible with all GO! fabric cutters and Studio 2™ fabric cutters when used with the appropriate adapter.

What size buckle works with this die?

This die is designed for 1 ½" finished belts and works with standard 1 ½" belt hardware and buckles.

Can I cut leather or cork with the GO! Belt die?

Yes. The die can cut cork, leather, vinyl and other specialty materials. For best results, cut one layer at a time.

Is the GO! Belt die beginner-friendly?

Absolutely. The die simplifies measuring and trimming while delivering accurate cuts, making it a great option for beginners and experienced makers alike.

What strip cutters work with the GO! Belt die?

GO! Strip Cutters are ideal companions for creating straps, closures and coordinating belt sections.

How many free patterns come with the die?

The GO! Belt Die to Try release includes five free patterns to help makers get started immediately.

Can I use the GO! Belt die for bags and accessories?

Yes. The die works beautifully for purse accents, tote bag straps, closures, roll-up carriers and other accessories.

Is the GO! Belt die a limited-edition Die to Try release?

Yes. Like all Die to Try releases, this is a limited-edition, small-batch offering available only while supplies last or through the end of June 2026.

Don’t Miss This Limited-Edition Die to Try Release

The GO! Belt-1 ½” Finished Die opens the door to stylish accessories, clever organizers, wearable projects and creative finishes that go far beyond quilting.

Whether you’re sewing handmade belts, finishing a trendy needlepoint project, upgrading a tote bag or creating gifts for friends and family, this versatile die helps make the process faster, easier and more accurate.

Like every Die to Try release, the GO! Belt die won’t be around forever. Grab yours while supplies last and see where your creativity takes you!